1. Home
  2. it
  3. node
  4. Tube Beveling Machine PROTEM US25CH (Ø 0.5" - 4.724")

Metal-Interface takes great care to protect your privacy: when you submit a request or ask a question, your personal information is passed on to the supplier concerned or, if necessary, to one of its regional managers or distributors, who will be able to provide you with a direct response. Consult our Privacy Policy to find out more about how and why we process your data, and your rights in relation to this information. By continuing to browse our site, you accept our terms and conditions of use.

  • The PROTEM US25CH will perform repeatable high quality weld end preparations on virtually all materials.
    Global-Industrie 2023 Press release

    Tube Beveling Machine PROTEM US25CH (Ø 0.5" - 4.724")

    Published on 10/02/23
Submitted by a.merlet.securite on Fri 10/02/2023 - 15:02
Contenu

  • The ID mount and portable US25CH is adapted for the maintenance and repair of Boilers and Heat Exchangers Tubes. It features a modified torque, the tool-holder plate features 2 grooves to mount standard HSS tool bits, 2 grooves with locking wedges to mount insert holders, the addition of a double-lip seal to prevent chips from entering into the machine when working on ceiling mounted panels/components, the addition of a sintered guide ring to replace the needle bearing, the addition of a bushing (protection against chips), a specific longer clamping shaft (specifically designed to clamp after flared parts) basic blades with a 8° angle.

  • Technical features of the Tube Beveling Machine PROTEM US25CH

    Specific shapes & angles: Facing 90°, bevel 30°, 37°30, 45°, counterbore, J-bevel, Other on request

    Clamping: Manual with a key

    Feed stroke: 1.378“ (35 mm)

    Expansion: 0.394” (10 mm)

    Cutting head gear drive: 150 rpm off-load speed, 70 rpm nominal speed, Approximate rotation speed according to air pressure and air flow

    Pneumatic drive: 730 W, 6 bar (87 psi), 1400 l/min (49 cfm). Pneumatically driven machines have to be used with a lubricating filter. Recommended option: regulation valve

    Electric drive: 110 V (1500 W) or 220 V (1050 W)

    Advantages :

    • Portable
    • Powerful Machining Equipment
    • Easy and Safe use for the Operators
    • No Heat Affected Zone
    • High Accuracy
    • Fast and easy mounting
    • The tool bits can be changed and adjusted very quickly
    • Adapted for works in tight spaces
    • The machine can be used in all positions: vertical, horizontal, over head
    • Versatile Cutting Head: the tool-holder plate can accept up to 4 tool bits for simultaneous machining operations (land, bevel, counterboring, j prep)
    • Smooth and Burr-Free Surface Finish
    • No vibration during the machining process

Thank you! Your article is registered.
Close