Waterjet Cutting Machines PHENIX TECHNOLOGIE

About ROTOJET:

The ROTO JET water jet cutting table is a 3 positions production machine for cutting, with placing system by video projection for non uniform raw-shaped supple materials (leather, rubber, seals, foams).

Technical description

The ROTOJET water jet cutting machine integrates the cutting unit, the fog exhaustion system, the electrical cabinet and the 15 Hp pump 4135 bar. The machine is constituted of a welded frame and a 3 positions carousel. The beam is motorized in X and Y with balls transmission and prismatic linear guiding. The beam is designed as “flying arm” motorized on one side only and holding the high performance Accustream pneumatic head – pure water with diamond nozzle.

A mast holding a video projector allows direct placing on the material to be cut. Productivity is assured by a 3 positions rotating table (placing-cutting-unloading) with indexing and honeycomb material supports.

The high quality Brushless motors and precision reducer on the ROTOJET have been especially selected in order to meet with high cutting speed requirements.

The machine is controlled from a control panel on the carousel equipped with: Control system 2 or 3 axes in real time based on Industrial PC and Man/machine interface with Windows SEVEN.

Dynamic performances:

• Maximum running speed: 40 to 50 m/mn
• Speed increasing: 2m/s
• Precision: +/- 0.1mm
• Repeatability: +/- 0.05mm

Cutting useful surfaces: upon customer’s request

MD-X Water jet cutting machine

The MD-X, PHENIX TECHNOLOGIE new water jet cutting machine, has been commercialized since second quarter of 2016.

About MD-X:

The MD-X water jet cutting center is mainly dedicated to « pure water » applications but can also use the « hydro abrasive » process.

It is equipped with 4 servomotors allowing high moving speeds (40 to 50 m/minute) and 1 to 5 cutting heads. Ideal for medium to large series, it combines quality and long lifetime.

The 4137 bar high pressure pumps power varies according to the customer’s needs and requirements: 30 Hp, 40 Hp, 50 Hp, 75 Hp, 100 Hp or 150 Hp.

Technical description:

The MD-X cutting table is constituted of a rectified welded frame with machined guiding bearings (DUAL GENTRY model – Double axis X or Y). It is equipped with prismatic linear rails INA type and transmission by rack and pinions on X and Y axes with self-adjustment and ball screw on Z axis. It is motorized by 4 “brushless” motors with YASKAWA-OMRON incremental encoder. Its axes are entirely protected by bellows and protective casings against abrasive spraying.

• Precision reducer – large moving speed

• Qualitative components and material selection (guiding, ball screws shaft, nuts, sensors, cables, mechanical and electric components, etc.) – CE standards
• From 1 to 5 heads with manual or motorized spacing

Dynamic performances:

• Maximum speed X and Y: 40 to 50 m/minute

• Maximum speed Z: 40 to 50 m/minute

• Maximum cutting speed: 10 m/minute

• Precision: +/- 0.1mm

• Repeatability: +/- 0.1mm

Useful surfaces available (XxYxZ):

From 1050 mm x 2050 mm x 210 mm (option 310mm)

to 2050 mm x 6050 mm x 210 mm (option 310mm)

PHENIX TECHNOLOGIE MD-X WATER JET CUTTING CNC

MD Jet waterjet cutting machine

About MD JET:

The water jet MD JET cutting table is a compact flying beam-type table, constituted of a cast steel frame suffering no distorsion. With its reliable precision, it combines quality and long lifetime thanks to its special design made to minimize the machine wear due to the hostile environment with abrasive cutting.

Technical description:

The MD JET water jet cutting system is constituted of a cast cantilever frame (flying beam to facilitate loading by 3 sides of the machines) that can be equipped with 1 or 2 pneumatic cutting heads with very high performance.

The X, Y and Z axes are fitted with transmission by ball screws, linear rail guides and prismatic linear rails mounted on the frame previously rectified by a machining centre as well as Brushless motors with incorporated incremental encoder, protective casing against abrasive spraying and automatic lubrication.

The well achieved designed and the use of top range components allows to minimize the machine wear coming from an hostile environment with hydro-abrasive cutting and to guarantee a reliable precision while running with low production costs.

• Qualitative components and material selection (guiding, ball screws shaft, nuts, sensors, cables, mechanical and electric components, etc.)  CE standards
• Separated frame and tank
• Precision: +/- 0.1mm
• Repeatability: +/- 0.05mm

Useful surfaces available (XxYxZ):
1505mm x 2005mm x 210 mm (option 310mm and 500mm)
1505mm x 2505mm x 210 mm (option 310mm and 500mm)
1505 mm x 3005 mm x 210 mm (option 310 mm y 500 mm)
2005mm x 2005mm x 210 mm (option 310mm and 500mm)
2005mm x 2505mm x 210 mm (option 310mm and 500mm)
2005mm x 3005mm x 210 mm (option 310mm and 500mm)
2005mm x 4005mm x 210 mm (option 310mm and 500mm)
2005mm x 6005mm x 210 mm (option 310mm and 500mm)
2005mm x 8005mm x 210 mm (option 310mm and 500mm)
2005mm x 10005mm x 210 mm (option 310mm and 500mm)
2005mm x 12005mm x 210 mm (option 310mm and 500mm)
and more in length.

About PRO JET:

The PRO JET water jet cutting table is a welded structure machine with reliable precision, combining quality and long lifetime, thanks to its special design made to minimize the machine wear due to the hostile environment with abrasive cutting.

Technical description

The PRO JET water jet cutting system is constituted of a high thickness welded frame with machined guiding bearings (DUAL GENTRY model – Double axis X or Y). The access to the loading of the cutting table can be done by 2 sides of the machine.

It can be equipped with 1 to 4 cutting heads and various tools (drilling and milling machines).

It is equipped with prismatic linear rails and transmission by ball screws on all axes. It is motorized by 4 “brushless” motors with YASKAWA-OMRON incremental encoder. Its axes are entirely protected by protective casings against abrasive spraying and its automatic lubrication system facilitates the maintenance.

The PRO JET well achieved designed and the use of top range components allows to minimize the machine wear coming from an hostile environment with hydro-abrasive cutting and to guarantee a reliable precision while running with low production costs.

• Qualitative components and material selection (guiding, ball screws shaft, nuts, sensors, cables, mechanical and electric components, etc.) – CE standards
•  Separated frame and tank
•  Precision: +/- 0.1mm
• Repeatability: +/- 0.05mm

Useful surfaces available (XxYxZ):
1505mm x 2005mm x 210 mm (option 310mm and 500mm)
1505mm x 2505mm x 210 mm (option 310mm and 500mm)
2005mm x 2005mm x 210 mm (option 310mm and 500mm)
2005mm x 2505mm x 210 mm (option 310mm and 500mm)
2005mm x 3005mm x 210 mm (option 310mm and 500mm)
2005mm x 4005mm x 210 mm (option 310mm and 500mm)
2005mm x 6005mm x 210 mm (option 310mm and 500mm)
2005mm x 8005mm x 210 mm (option 310mm and 500mm)
3005mm x 4005mm x 210 mm (option 310mm and 500mm)
4005mm x 6005mm x 210 mm (option 310mm and 500mm)
and more in length and width.

FIRST Jet waterjet cutting machine

About :

The water jet FIRST JET is a compact system and optimized for the small sizes offering you the solution to your contraints dimensions.
Of a quality manufacturing, its stiff structure in cast iron of steel undergoes no deformation.

Technical description

The water jet FIRST JET is constitued by a frame monoblock molded in foundry and provided with a flying arm supporting 1 or 2 heads of very high performance pneumatic cup.
The access to the load of the table can be made by 3 sides of the machine.

Axes X, Y et Z have :
- Transmission by screw has ball
- The guide by skates with balls and prismatic linear rails gone up on the frame beforehand rectified in the manufacturing center
- Engines Brushless with incorporated incremental code
- Slide channels of protection against the abrasive
- An automatic lubrication

The accomplished conception of the FIRST jet and the use of components high-end allow :
- To minimize the wear of the machine resulting from the hostile environment of the hydro-abrasive cut
- To guarantee you a long-lasting precision
- To obtain a moderate cost of exploitation of machine

Precision : +/- 0.1mm
Repetability : +/- 0.05mm

Material for the abrasive :
- Abrasive system under pressure.
- Jar of abrasive with flow regulator (allows to check the grammage per minute)

Floor space of cut (X x Y x Z):
1350mm x 1350mm x 210 mm (option 310mm)

The PHENIX TECHNOLOGIE 5 axes hydro abrasive cutting centers are equipped with the PHENIX TECHNOLOGIE X5 system.

This system automatically balances the jet delay and suppresses clearance (see images here below) due to the jet conicity. The X5 system is equipped with 2 rotary motors allowing the head inclination on A and B axes. The cutting head can thus rotate in any direction while adjusting the jet imperfections by using complex mathematics models.

A axis: 1 rotary axis

B axis: 1 rotary axis

The X5 system also allows the operation of chamfered parts.

The PHENIX TECHNOLOGIE X5 system can equip any table in the PRO JET range, whichever the dimensions chosen.

Few examples:
PRO JET 5X 1530
PRO JET 5X 2040
PRO JET 5X 2030
PRO JET 5X 6020